Installation Instructions V-Cam

with 3/4", 1 1/2" and Deep Seat V-Cam Hardware

Required Tools

• Center Punch
• Drill (1/4" or 3/8" electric)
• Drill Bits : 5/16", 9/64"
• Extension Cord
• Hammer
• Level (3' minimum)
• Level Bar
• Needle Nose Pliers
• Pen Pencil
• Plumb Bob
• Ratchet Wrench with 3" or 5" extension
• Ratchet Socket 9/19", 1/4"
• Screw Driver, Slotted
• Security Driver
  (for Steel-Lite only - bit supplied by RubbAir)
• Tape Measure
• Tap 3/8" - 16 NC
• Wood Spacer Block (scrap 2"x4")

Next Step